Recommended Stainless Brake Lines?

[valanahara]

I recently purchased the M-2300 T 13/14 GT500 brake kit for my car and I noticed that the lines that come with the kit are not stainless. After some more digging I found that it's a must-do mod for the 13/14 cars on the track so I'm going to do the same.

Can anyone offer recommendations on a brand of stainless lines or have an experience with some?

 

[geoffmt]

I got mine from Baer Brakes when I ordered my setup. no complaints!

 

[valanahara]

I got mine from Baer Brakes when I ordered my setup. no complaints!

Is there a place to order just the lines from them? I can't seem to find it on the site but I could be completely missing it.

 

[geoffmt]

I would call them and speak to a person. I would also look at what Lethal carries or Late Model Restoration has. That could be more cost effective. LMR has a discount code on this site, Lethal may as well

 

[beau t]

pulled from Revan Racing website Hope this helps

• 
• 
• 
• 

Price:
$248.00
Shipping:
Calculated at checkout

* Stainless Steel Braided Replacement Clutch Line:

• No Thanks
• Stainless Steel Braided Replacement Clutch Line +$60.00

 

[Ray Lucca]

Call Van at Revan racing, His set-up is made for the 13-14.

 

[Cman01]

^^^^sorta. I have a set on my car, works good but the 1 bracket at the back doesn't work properly on the pass. side.

The OE bracket on that side holds some of the vacuum lines and ABS wiring stuff back there and I believe the bracket is part of the rubber brake line that you remove. I modded it so I can keep part of that bracket to use with the braided line and keep the vacuum lines and ABS wiring connected properly back there.

It's a good kit, other than the above it fits very nice on 13-14 Shelbys.

Tony

 

[Norton]

I'm also running Van's SS (brake and clutch) lines. I'm not arguing with Tony's experience but, FWIW, we had no trouble installing mine.

 

[48yrs]

^^^^sorta. I have a set on my car, works good but the 1 bracket at the back doesn't work properly on the pass. side.

The OE bracket on that side holds some of the vacuum lines and ABS wiring stuff back there and I believe the bracket is part of the rubber brake line that you remove. I modded it so I can keep part of that bracket to use with the braided line and keep the vacuum lines and ABS wiring connected properly back there.

View attachment 1453201

It's a good kit, other than the above it fits very nice on 13-14 Shelbys.

Tony

Thank you very much for taking the time to give us the heads up on this small issue that's part of Vans GT500 Stainless Steel Brake line upgrade kit. I realize many GT500 owners will Not care about the difference and lack of OEM routing of the misc. ABS wiring and other lines on the rear passenger side brake assembly. But, in my case it does matter thus I appreciate your information and reference to improving/modding it.

Thank you