Hey guys does anyone make return fuel rails that fit the 03-04 cobra? I need some that will connect to stock Ford fittings for my 97->03 engine swap.
Return Fuel Rails
- Thread starter Roush97
- Start date
this is what I was going to use on my swap.
Aeromotive 15102 and 15101 are the adapters if your going to use the return system and then I used Aeromotive 14111 fuel rails.
I decided not to use the adapters but used the rails and made my own full return setup. I felt the stock lines (send and return) were to small to support all the pump and the size of the rails. I wanted to make some good HP (450 - 550HP) and I just a worry wort and a ol'schooler. Fat pump(s), fat lines, good rails, good regulator = HP for years.
Aeromotive 15102 and 15101 are the adapters if your going to use the return system and then I used Aeromotive 14111 fuel rails.
I decided not to use the adapters but used the rails and made my own full return setup. I felt the stock lines (send and return) were to small to support all the pump and the size of the rails. I wanted to make some good HP (450 - 550HP) and I just a worry wort and a ol'schooler. Fat pump(s), fat lines, good rails, good regulator = HP for years.
Thanks alot. What fittings did you use to connect the fuel rails to the lines? Is it possible for me to get a picture of your setup? Thanks again.
yea I'll take some pictures later.
Pics??
Users who are viewing this thread
