Roush TVS 2.3 kit + Extras!

SCalla1384

Active Member
Established Member
Joined
Jul 25, 2009
Messages
2,626
Location
Massachusetts
Hey guys, selling a very near complete Roush TVS 2.3 kit. The only thing you'll need is spark plugs. I can even include an SCT x4 (for an extra $250) if you need one. Here's the kit details

Roush TVS 2.3 supercharger kit
ID1000 injectors
82mm and 85mm pulleys
Roush open box intake
Roush closed box intake also included
JLT Passenger side catch can
Roush Boost gauge
AC vent pod for boost gauge

I ran the open box intake and 82mm pulley. My car has 1-7/8 headers and no cats, I made only 8.6psi on the dyno. But the car laid down 620whp and 557ftlb. Car also went 11.04 @ 130.15mph (6 speed car on nitto drag radials) this was all on 93. I did add a can of torco at the track for safety, but my tune isn't adding any more timing. Just in case to protect from detonation.

If you do go e85 you will most likely need a BAP.

I have everything except the supercharger off the car, I'll have that off tomorrow. Take me about 15 minutes. But I've wrapped everything up individually in bubble wrap, and labeled all the hardware to make the installation as easy as possible for the buyer.

I would like $5,500 shipped (you cover PayPal fees) or best REASONABLE offer. This kit new is $6100. But I'm including the Roush open box intake ($600 lol) ID1000s, boost gauge/vent pod. And I know I'll take a decent hit on shipping. Probably between $250-300. Just buying the supplies to wrap and box stuff up was $75.

If you're interested, send me a text! 617 827 1384

A99F72D3-A423-4649-9A37-2B7C6022961A_zpsjxiuocnr.jpg


2963CC3A-A103-46A5-8F67-4775FEB0D6A1_zpsx27sqogw.jpg


E5D6E022-DAEE-421E-A0FE-853CB23CEEA3_zpspwbjxsnu.jpg


08CB2EDD-CC86-4DA2-87FA-E6A32F0B8751_zpsbk7ueoss.jpg


09243455-2EB2-45D3-A8A7-5B1B2F6072AE_zpsojffezon.jpg
 

SCalla1384

Active Member
Established Member
Joined
Jul 25, 2009
Messages
2,626
Location
Massachusetts
Want to keep everything together. Unless the guy buying the blower doesn't want the injectors, then I'll part them out.
 

Kman11

Member
Established Member
Joined
May 1, 2016
Messages
166
Location
Peabody, MA
This is super tempting. I was planning to go SC'd this winter... I'm in mass as well, can you PM your bottom dollar?
 

SCalla1384

Active Member
Established Member
Joined
Jul 25, 2009
Messages
2,626
Location
Massachusetts
Bump! Guys I've gotten a few pm's as far as parting stuff out. I'm keeping everything together. Only thing I'd part would be the injectors only if the person buying the blower didn't want them.
 

redfirepearlgt

SIT BACK AND HANG ON !!!
Established Member
Joined
May 16, 2012
Messages
275
Location
Springfield, USA
PM me if you are willing to let the JLT passenger side catch can go. Sure wish you had 56lb injectors but I'm sure you went from 47's to the ID 1000's. Thanks for getting back.
 

SCalla1384

Active Member
Established Member
Joined
Jul 25, 2009
Messages
2,626
Location
Massachusetts
Keeping it all together for now.

Bump! Still would like $5250 shipped or best reasonable offer! Don't forget, The kit is including ID1000s, roush open box intake, boost gauge/mount and JLT separator.

Some people have message me asking if I'd take $3500. Please don't waste my time. I get people want to save money, I'm the same way. But be realistic please lol
 

Users who are viewing this thread



Top