Just installed rxt with new everything. 26 spline about 700 miles on it and its slipping in all gears helllllp
rxt slipping
- Thread starter brandonwilgis7
- Start date
+1..do you have a firewall adjuster installed? If so how far in to you have it? Screw it into the firewall (CW) to make the pedal grab closer to the floor and loosen the cable. This will relieve the pressure off of the PP and increase clamping force while your foot is off the pedal (clutch engaged). If it's grabbing too high you're loosing all of your clamping force from the PP and that's why it slips.
Yes it does had a quadrant and is set way away from floor only press clutch an inch to shift that's the way mechanic set it up
Well then that sir is your problem. Go under your hood and screw that adjuster way in until it grabs off the floor and it won't slip. :banana:
I've got my adjuster screwed maybe 1/4'' from all the way and it grabs pretty close to the floor. Clutch holds for days.
Last edited:
Wonder y runner set it this way also its been fine like this for 700 miles gave it some hell at mustang week and whoop there it went
Tunner
That is kind of weird if it wasnt slipping before...firewall adjusters have been known to back out. Take a look and see where it is :shrug: Either way it shouldn't be grabbing at the very top of your pedal range.
Last edited:
Users who are viewing this thread
