Home
What's new
Latest activity
Authors
Store
Latest reviews
Search products
Forums
New posts
Search forums
What's new
New posts
New listings
New products
New profile posts
Latest activity
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
Cart
Cart
Loading…
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Search titles only
By:
Menu
Log in
Register
Navigation
Install the app
Install
More options
Change style
Contact us
Close Menu
Forums
Cobra Forums
SN95 Cobras
S197 Seats + SN95 Cobra = Sexy!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="kdillard21" data-source="post: 10165135" data-attributes="member: 106258"><p><strong>Thank me later!</strong></p><p></p><p>SN95 Track----------------------------------> S197 SEAT</p><p></p><p>Slide Motor : </p><p></p><p>Red/WHITE ------------------------------→ Yellowish White/WHITE</p><p>Yellow/WHITE -------------------------→ Red/WHITE</p><p></p><p></p><p>Front Vertical Motor: </p><p></p><p> Yellow/BLUE --------------------------→Yellowish White/BLUE</p><p> Red/BLUE -----------------------------→ Red/BLUE</p><p></p><p></p><p>Rear Vertical Motor:</p><p></p><p> Yellow/GREEN -------------------------→ Yellowish White/GREEN</p><p> Red/GREEN------------------------------→Red/GREEN</p><p></p><p>SEAT POWER:</p><p></p><p> LARGE SOLID GREEN-------------------------------→ LARGE SOLID GREEN</p><p> LARGE SOLID BLACK(Ground) ---------------------→ LARGE SOLID BLACK</p><p></p><p>Lumbar Power:</p><p></p><p> Small Green (Discard) -----------------→ Pink & Brown, leave alone, powered by GREEN</p><p></p><p>Seat Belt Indicator:</p><p></p><p> (2)Small Black (Leave alone) ------------→Black/BLUE & Small Green (Discard)</p><p></p><p>If you can use a SN95 donor seat assembly, then you don't need to modify the track at all. You can cut the Male end of the SN95 pigtail off and splice it into the S197 wiring that way it plugs right into the SN95 track. Otherwise you have to hardwire them (not recommended in case you ever want to disassemble) or use your own pigtails from something else, which would force you to splice into the SN95 track side wiring as well. </p><p></p><p></p><p>No front spacers are necessary for the driver side if it is power tracks, but it will need around 5/8" in the back, a 3/4" course-threaded nut is the perfect thickness. </p><p></p><p>The passenger side needs 1" spacers for the manual track, a 3/4" course-threaded nut again with about SIX 5/16" fender washers works out to be 1 inch exactly. </p><p></p><p>Drilling the holes into the SN95 seat frame will pretty much only work in one location to get them centered and a little forward, the tracks mount at 14 x 14 inches.</p><p></p><p>If you are using the SN95 Seat belt, then you don't have to do any wiring at all to that portion. Just for reference, on the SN197 seat, the small black and green wire are for the seat belt indicator and air bag cutoff for when the seat it too far forward close to the steering wheel.</p></blockquote><p></p>
[QUOTE="kdillard21, post: 10165135, member: 106258"] [b]Thank me later![/b] SN95 Track----------------------------------> S197 SEAT Slide Motor : Red/WHITE ------------------------------→ Yellowish White/WHITE Yellow/WHITE -------------------------→ Red/WHITE Front Vertical Motor: Yellow/BLUE --------------------------→Yellowish White/BLUE Red/BLUE -----------------------------→ Red/BLUE Rear Vertical Motor: Yellow/GREEN -------------------------→ Yellowish White/GREEN Red/GREEN------------------------------→Red/GREEN SEAT POWER: LARGE SOLID GREEN-------------------------------→ LARGE SOLID GREEN LARGE SOLID BLACK(Ground) ---------------------→ LARGE SOLID BLACK Lumbar Power: Small Green (Discard) -----------------→ Pink & Brown, leave alone, powered by GREEN Seat Belt Indicator: (2)Small Black (Leave alone) ------------→Black/BLUE & Small Green (Discard) If you can use a SN95 donor seat assembly, then you don't need to modify the track at all. You can cut the Male end of the SN95 pigtail off and splice it into the S197 wiring that way it plugs right into the SN95 track. Otherwise you have to hardwire them (not recommended in case you ever want to disassemble) or use your own pigtails from something else, which would force you to splice into the SN95 track side wiring as well. No front spacers are necessary for the driver side if it is power tracks, but it will need around 5/8" in the back, a 3/4" course-threaded nut is the perfect thickness. The passenger side needs 1" spacers for the manual track, a 3/4" course-threaded nut again with about SIX 5/16" fender washers works out to be 1 inch exactly. Drilling the holes into the SN95 seat frame will pretty much only work in one location to get them centered and a little forward, the tracks mount at 14 x 14 inches. If you are using the SN95 Seat belt, then you don't have to do any wiring at all to that portion. Just for reference, on the SN197 seat, the small black and green wire are for the seat belt indicator and air bag cutoff for when the seat it too far forward close to the steering wheel. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Cobra Forums
SN95 Cobras
S197 Seats + SN95 Cobra = Sexy!
Top