ive been trying to promote our 18" stepped lip wheels so ive been offering an extra $100 discount on these sets.
ANY of our wheel designs can be done in 18" with stepped lips.
they can be done with OR without the "rivets". they are real bolts/nuts but are merely to give these 2 piece wheels a 3 piece appearance. fear not, they wont fall off or anything lol. they are lighter by a couple of pounds without the bolts though. after all, they are steel nuts/bolts.
they come in the following widths:
7", 8", 9.5" and 11"
common size for 94-13 mustangs would be 18x9.5 18x11
for fox mustangs, you can do 18x8 18x9.5
for a fox, if you want a 10" wide rear, we can have the 18x11 custom narrowed to 10" for an extra $150 per wheel ($300 total).
if you want a drag set up, we can do the fronts in 5.5", 6" and 6.5" for an extra $150 per wheel ($300 total).
our 18s will clear ANY brake set up on the market that is being sold for mustangs. 6 piston front and rear?? NO problem!
unlike our standard 2 piece 18s, we can put the valve stem in the outer lip as seen on this wheel here. you can use a flush mount valve stem for a cleaner look if you like. we can also put the stems behind the centers for a completely clean look if you prefer.
our 2 piece wheels can have ANY finish done except chrome plating since they are welded together.
polished finish is the standard finish. $2400 including shipping within the 48 states. $100-$150 extra for shipping to Canada via fedex air.
extra special pricing for certain cars including Saleens, Roush, Boss and 2013 GT500
the centers (the design) and or lips can be done in custom finishes.
centers OR lips in satin black, gloss black, flat black, textured black, anthracite, gunmetal, race gold, bronze and white are $50 extra per wheel. all colors are powder coated and can be done in gloss OR matte finish.
($100 per wheel for centers AND lips)
custom powder coated colors are available but do cost a little more. typically $25 extra per wheel.
centers OR lips (or both) can also be done in brushed aluminum, single tinted brushed, double tinted brushed, and black chrome for $75 per wheel
($150 for center AND lip)
custom oem paint and hydro carbon are also available but can vary in cost.
wheels as shown below are matte bronze powder coating with chrome assembly bolts added and with polished lips. these would cost $2700 shipped during this sale.
18x10 Speed Seven in gloss anthracite with polished lips for a Triumph
18x11 Mach Six in matte anthracite with polished lips
the bigger wheels in these drag pack pics are 18"
Mach Fives in polished finish with assembly bolts
Mach Fives in flat anthracite with polished lips, no bolts
Retros in polished finish, no bolts
some 17" stepped lip wheels
Victory
Chicanes
Mach Five
Sleepers
RS Tens
Split Six
ANY of our wheel designs can be done in 18" with stepped lips.
they can be done with OR without the "rivets". they are real bolts/nuts but are merely to give these 2 piece wheels a 3 piece appearance. fear not, they wont fall off or anything lol. they are lighter by a couple of pounds without the bolts though. after all, they are steel nuts/bolts.
they come in the following widths:
7", 8", 9.5" and 11"
common size for 94-13 mustangs would be 18x9.5 18x11
for fox mustangs, you can do 18x8 18x9.5
for a fox, if you want a 10" wide rear, we can have the 18x11 custom narrowed to 10" for an extra $150 per wheel ($300 total).
if you want a drag set up, we can do the fronts in 5.5", 6" and 6.5" for an extra $150 per wheel ($300 total).
our 18s will clear ANY brake set up on the market that is being sold for mustangs. 6 piston front and rear?? NO problem!
unlike our standard 2 piece 18s, we can put the valve stem in the outer lip as seen on this wheel here. you can use a flush mount valve stem for a cleaner look if you like. we can also put the stems behind the centers for a completely clean look if you prefer.
our 2 piece wheels can have ANY finish done except chrome plating since they are welded together.
polished finish is the standard finish. $2400 including shipping within the 48 states. $100-$150 extra for shipping to Canada via fedex air.
extra special pricing for certain cars including Saleens, Roush, Boss and 2013 GT500
the centers (the design) and or lips can be done in custom finishes.
centers OR lips in satin black, gloss black, flat black, textured black, anthracite, gunmetal, race gold, bronze and white are $50 extra per wheel. all colors are powder coated and can be done in gloss OR matte finish.
($100 per wheel for centers AND lips)
custom powder coated colors are available but do cost a little more. typically $25 extra per wheel.
centers OR lips (or both) can also be done in brushed aluminum, single tinted brushed, double tinted brushed, and black chrome for $75 per wheel
($150 for center AND lip)
custom oem paint and hydro carbon are also available but can vary in cost.
wheels as shown below are matte bronze powder coating with chrome assembly bolts added and with polished lips. these would cost $2700 shipped during this sale.
18x10 Speed Seven in gloss anthracite with polished lips for a Triumph
18x11 Mach Six in matte anthracite with polished lips
the bigger wheels in these drag pack pics are 18"
Mach Fives in polished finish with assembly bolts
Mach Fives in flat anthracite with polished lips, no bolts
Retros in polished finish, no bolts
some 17" stepped lip wheels
Victory
Chicanes
Mach Five
Sleepers
RS Tens
Split Six
