Saleen S351 Computer and harness????

BNblownsaleen

.
Established Member
Joined
Sep 14, 2007
Messages
166
Location
Lexington,NC
To make things somewhat sweet, short, and to the point, I am planning on doing a EFI 351W swap in my 2001 V6 mustang. I am wondering what computer and harness are used for the 99+ S351?? Are the same as a 94-95 gt/cobra? I am sure I could get the computer harnesses from the 94-95 to work but I want everything to work, like it straight from the showroom, gages a/c etc.

Another thing I am pondering is the a/c,ps,alt brackets. Are they the same as the 94-95 302 brackets.

I am also going to be installing a S or T trim Vortech on it as well so should I be looking for a 94-95 supercharger as well? Thanks for any info or links that might help me with this swap.
If someone doesn't buy this v6 in the next week the project will begin, If it sells I will be chasing after a 03-04 cobra.
 

BNblownsaleen

.
Established Member
Joined
Sep 14, 2007
Messages
166
Location
Lexington,NC
Doing some research I noticed that all of them that I have seen have 87-93 Throttle bodys and no curve like the 94-95 gt/cobra......Huh whats up with that?
 

S351R13

Member
Established Member
Joined
Feb 14, 2004
Messages
553
Location
Fort Knox, KY
The computer is from a 96 E250 van that has been modified by Cosworth Engineering, the wiring harness is custom, the throttle body is a fox style throttle body (less restriction). The Vortech set-up is close to a 94-95 but with a few s-351 specific parts. The front accessory brackets are all 94-95 stuff. You can use the 94-95 harness but, you have to swap pretty much every harness in the car along with using a 94-95 instrument cluster. The 01 car will have the PATS system that you will have to get rid of. If you go with a 94-95 harness do the A9L conversion. It will make more power.
 

ponyracer

New Member
Established Member
Joined
Feb 19, 2007
Messages
115
Location
Oregon

Users who are viewing this thread



Top