sbf stuff fs

konafiveoh

New Member
Established Member
Joined
Jan 27, 2012
Messages
105
Location
lawton,ok
Trick Flow 170 heads with screw in studs and guide plates and arp head studs these heads have some very nice port work and are fresh with springs good to 670 lift set up for a hyd roller* 1200.00 obo.

Headman 1 5/8 long tube headers for a fox with a 3" collector 3 bolt flange with evac tubes no dents or dings and are painted in high heat black. 250.00

Edlebrock victor jr intake ported to match above heads for 8.2 deck sbf 150.00

Cam motions custom hyd roller cam 241/248 @50 with 642/651 lift on a 109 with matching redline horizontal bar hyd lifters and pushrods for above heads and intake this cam pulls good to 7500 rpms 600.00

for all.Package deal on all above 2000.00

This combo on a 347 with 200 spray in a 3100# car went 5.90s and drive anywhere.

Dss custom nitrous piston for a 4.040 bore with small rings and small dome with 58cc head yield 11.6.1 these pistons are for a .040 over 347 with a 5.4 rod and comes with rings and pins and top ring is down .288* 350.00

Holley black pump with regulator 65.00

Dss main girdle for sbf 8,2 deck sbf 100.00

Comp cams hyd roller 232/238 @50 and 630/641 lift on a 112 lobe 125.00

Contact Stacy Kinney 580 512 7882
 

Users who are viewing this thread



Top