SCT BA 3000 MAF Inlet Tube...

[DiZzyBonne]

I bought an SCT BA 3000 MAF for my blow-through P1SC setup. Now, here's my problem:

Imageshack - manual2 - Uploaded by dizzybonne - Assembly, look at the MAF part.
Imageshack - maf - Uploaded by dizzybonne - MAF part.
Imageshack - newstuff046 - Uploaded by dizzybonne - My MAF inlet tube is on the bottom left.

The "inlet tube" I have is for a stock MAF, it's not big enough. I ended up getting the SCT BA 3000. What are you guys using for your blow through application? I need to buy one to finish the kit .

 

[flowgoode]

I use a pro-m 90mm.

 

[DiZzyBonne]

Where did you get that adapter tube, the piece on the bottom that connects to the 90 degree rubber hosing?

Mass Air Meters : Promracing.com, The Standard in Mass Air Flow Meters - That's all I could find, none of it looks like the bottom piece you have and it looks like strictly MAFs.

 

[01yellercobra]

I have mine mounted in a piece of blower pipe that takes the place of the MAF. I used a flange I bought from VMP. Very clean and works really well.