SES Light and codes

[2MuchHP]

On the way home from work I noticed the SES light was on.

After limping home I got 2 codes with the predator with the ignition on but not running.

P0340
P0350



Any ideas?

 

[MidLifeC]

From http://www.obdii.com/codes.html :

P0340 Camshaft Position Sensor Circuit Malfunction
P0350 Ignition Coil Primary/Secondary Circuit Malfunction


Coil wires or camshaft position sensor? Loose / piinched wiire around the valve cover / fuel rails? :shrug:

 

[2MuchHP]

sigh

I wish I knew where that sensor is.

P0340 - Cam shaft sensor malfunction.

I dont see any lsoe wires but I dont know where to look for it.

 

[JB]

....I don't have service DVD available presently, but I believe it should be mounted in the front cover somewhere

 

[03cobra#694]

the cam sensor is right behind the p/s reservoir on front of motor.

the 450 code indicates a bad coil bad i dont believe that is the case since it didnt set a cylinder misfire code along with it .

i would guess just a bad cam sensor / wiring problem.

can reset codes and scan for you but i am in jackson ....
i can bring it with me sat if you want !!!!!!

JEFF

 

[2MuchHP]

Is this it?

Thanks for the help man, I had a buddy with an 03 take some pics of his, since mine is at home.

Is this it?

If it is I am wondering how to repalce that.. hope no wire needs to be spliced.

 

[03cobra#694]

yes that wire goes to it .... usually not the wires probably the
sensor . it is held in with one bolt then slides out of cover
seals with o ring .

JEFF