Does anyone have any information or advise on how to get the SK off. Purchased a new one from SpeedDawg but can't budge the old one. Tried heat and strap wrench and got it to turn about 1/4-1/2" to the passenger side.:mj:
Shifter knob
- Thread starter Anarchy
- Start date
um, isn't passenger side to the right? try turning it the other way. may have better results....
:beer:
I used just a strap wrench set that I got a Autozone. Didnt not have to use heat. Used both small and large one to get the Silver piece off of OE shifter.
meant turning left but 6th number facing right by 1/4-1/2" or 1st number at 1 and 6th number at 7.
It's just that tight.........THE ENTIRE WAY OFF. Keep on adding elbow grease and it will come off eventually.
If Bangastang ever sends me mine, I will get to put it on. Going on 2 months on the 20th for me when I ordered it.
Righty Tighty - Lefty Loosey
Last edited:
Well did not have time to get back on but finally got the knob off yesterday. Needed to heat a few times to loosen plus a lot of elbow grease. The strap wrench (2) of them did not work for me. It had red lock-tite caked on the threads and ball. Ran a die over the threads to clean before mounting the new knob. I did not use any lock-tight on the new set-up.
Users who are viewing this thread
