Noticed today that the LED's weren't coming on when getting into it. Thankfully no WOT runs.
So doing some trouble shooting:
Taking a 12v straight to pole 87 of the relay does nothing but make the pump make a faint thunk sound, and the LED doesn't come on.
However, running power straight to the pump itself turns itself on and I'm assuming the LED comes on?
Do I have a bad controller?
So doing some trouble shooting:
Step 2 Test LED vs. Pump On
Apply a 12v source to pole #87 of relay (single red wire, not red/green
wire). Pump should activate and LED should go on. Check LED ground
and wiring if no activation. If wiring and ground check out okay, check
LED with 12v source.
Taking a 12v straight to pole 87 of the relay does nothing but make the pump make a faint thunk sound, and the LED doesn't come on.
However, running power straight to the pump itself turns itself on and I'm assuming the LED comes on?
Do I have a bad controller?
Last edited: