• Welcome to SVTPerformance!

Spec Super Twin clutch

Discussion in 'Engine/Drivetrain' started by safado, Feb 11, 2014.

  1. safado

    safado bleed'n blue Established Member

    Messages:
    1,025
    Joined:
    Sep 24, 2002
    Location:
    Phoenix
    Hey fellas, i am still trying to figure out which version this clutch is... if you know please feel free to chime in...

    This clutch was taken out because the new owner of this GT500 thought it was the stock clutch.. after telling him he said "just change it"... ok!


    2013-12-23204522_zpsace15292.jpg

    2013-12-23210044_zps57430983.jpg

    2013-12-23204614_zps7b18cff6.jpg


    Asking 750 shipped
     
  2. safado

    safado bleed'n blue Established Member

    Messages:
    1,025
    Joined:
    Sep 24, 2002
    Location:
    Phoenix
    bump 550 shipped
     
  3. Reaper6193

    Reaper6193 New Member Established Member

    Messages:
    105
    Joined:
    Jul 28, 2011
    Location:
    El Paso
    How many miles on it?
     
  4. safado

    safado bleed'n blue Established Member

    Messages:
    1,025
    Joined:
    Sep 24, 2002
    Location:
    Phoenix
    unknown... the car itself has 49K.. the guy had just bought the car.. no previous history...
     
  5. ZX6Ray

    ZX6Ray Member Established Member

    Messages:
    303
    Joined:
    Feb 21, 2013
    Location:
    Arkansas
    Can you provide a close up pic of how much lining is left? If he wanted it out it must be slipping...
     
  6. safado

    safado bleed'n blue Established Member

    Messages:
    1,025
    Joined:
    Sep 24, 2002
    Location:
    Phoenix
    here is a close up of the lining... the clutch isn't new..thats for sure... but it is in still useable shape...for those that do your own work this is not a big deal... for those that pay to have it installed then the cost might not be worth it.. make an offer.. ya never know!!

    2014-02-15112320_zpsab21c6f8.jpg
     
  7. 466scj

    466scj Old School Stangbanger Established Member

    Messages:
    852
    Joined:
    Mar 21, 2012
    Location:
    alabama
    SPEC will re-line it if it needs it and it sells cheap enough.They're customer service is excellent and good to deal with.Their clutches take a different technique on release,but once you get the hang of it,it is fine.Some don't like it because it is different than stock,but the cover is billet/machined and will take lots of hp.You can also flip the wear surface on the flywheel for a new surface.I run one in my GT500.GLWS
     
    Last edited: Feb 15, 2014
  8. ZX6Ray

    ZX6Ray Member Established Member

    Messages:
    303
    Joined:
    Feb 21, 2013
    Location:
    Arkansas
    I was mostly hoping for a close up picture of the rivets recessed into the lining. I'm interested and do my own work!
     
  9. 2004Droptop

    2004Droptop Member Established Member

    Messages:
    836
    Joined:
    Oct 3, 2011
    Location:
    Holly Springs, North Cackalacky
    Actually looks pretty low mileage to me
     
  10. sportinawoody

    sportinawoody Member Established Member

    Messages:
    400
    Joined:
    Jun 6, 2009
    Location:
    nc
    mine wasnt flippable, i just paid up for a new one last week.
     
  11. ZX6Ray

    ZX6Ray Member Established Member

    Messages:
    303
    Joined:
    Feb 21, 2013
    Location:
    Arkansas
    Sold? Still waiting on a pic of the recessed rivet on the mating surface of the clutch lining.
     
  12. ZX6Ray

    ZX6Ray Member Established Member

    Messages:
    303
    Joined:
    Feb 21, 2013
    Location:
    Arkansas
    Not going to take chances on this one, moving on...
     
  13. 466scj

    466scj Old School Stangbanger Established Member

    Messages:
    852
    Joined:
    Mar 21, 2012
    Location:
    alabama
    How much was it?
     

Share This Page