Squeeking + Tinted Side Markers?

[PIXER]

Well its SUPER ANNOYING......... Whenever I am moving slow and take wither a left or right turn (sharp or sometimes not-so-sharp) I hear a rear-rear-rear sound coming from the rear of my car.

There is no way my tires are rubbing (275's on 17x9's)
WHat could it be?
A break issue?
Maybe low fluid in the rear end?
Its driving me nuts!
Thanks.




ALSO....... Where can I buy some tinted side markers (for the rear bumper)

 

[LILBLKSNAKE]

ALSO....... Where can I buy some tinted side markers (for the rear bumper)

Buy VHT nightshades and spray your own. Don't forget the front ones!!!
http://store.summitracing.com/partdetail.asp?part=vht-sp999

As far as the squeak, have you changed anything in the rear lately???

 

[Rocsfinest97]

hmm.. if its the brakes it could possibly be:

a caliper clip sticking
warped rotor
pads need lube (IE. lucas no squeal lubricant)
new pads in general

is there alot of brake dust on your rear(s)?

 

[PIXER]

Buy VHT nightshades and spray your own. Don't forget the front ones!!!
http://store.summitracing.com/partdetail.asp?part=vht-sp999

As far as the squeak, have you changed anything in the rear lately???

nothing, (fuel filter)
I bought the car just over a month ago and its done it the whole time :nonono:

Can I buy the VHT somewhere local? (autozone, advanced auto etc.?)

 

[PIXER]

hmm.. if its the brakes it could possibly be:

a caliper clip sticking
warped rotor
pads need lube (IE. lucas no squeal lubricant)
new pads in general

is there alot of brake dust on your rear(s)?

no not really much at all.
Pads look good ( he told me they were relatively new)

 

[LILBLKSNAKE]

Can I buy the VHT somewhere local? (autozone, advanced auto etc.?)

I posted the summit racing link

 

[LILBLKSNAKE]

Do you think the squeak could be rear control arm bushings?? Or perhaps the rear bushings were replaced with Urethane bushings that might need to be lubed??

 

[Rocsfinest97]

Do you think the squeak could be rear control arm bushings?? Or perhaps the rear bushings were replaced with Urethane bushings that might need to be lubed??

+1 that was my next guess

 

[Cookieman00x]

you could need rear brakes or the dust shield could be rubbing...

 

[uofipilot]

I'm voting on the LCAs. My car sounds like a creaky bed, and I'm pretty sure its coming form the LCAs. 11 years and 75k....probably time to replace them anyway. Hopefully a new set will get rid of the squeaking.

 

[PIXER]

I'm voting on the LCAs. My car sounds like a creaky bed, and I'm pretty sure its coming form the LCAs. 11 years and 75k....probably time to replace them anyway. Hopefully a new set will get rid of the squeaking.

got a link to a good set?

 

[Rocsfinest97]

http://www.steeda.com/products/weightjackers.php

heard some pretty positive things about those.

 

[PIXER]

http://www.steeda.com/products/weightjackers.php

heard some pretty positive things about those.

expensive, always wondered why people replace there control arms?

 

[Cookieman00x]

Those look nice... expensive but adjustable...

 

[Rocsfinest97]

expensive, always wondered why people replace there control arms?

So when you rip out of the hole your car doesnt go sideways, and you grip like no tomorrow.

 

[albino96]

I bought the cut to fit tint. You can find it if you google 96-98 vinyl tail light tint or something. It's removable :thumbsup: