Home
What's new
Latest activity
Authors
Store
Latest reviews
Search products
Forums
New posts
Search forums
What's new
New posts
New listings
New products
New profile posts
Latest activity
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
Cart
Cart
Loading…
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Search titles only
By:
Menu
Log in
Register
Navigation
Install the app
Install
More options
Change style
Contact us
Close Menu
Forums
Mustang Forums
SN-95 and New Edge Mustangs
stage 2 comp cams? Notched pistons?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Stanger00" data-source="post: 13363219" data-attributes="member: 128629"><p>TF cam profiles arent too much off from other manufactures. They have a 112 LSA and durations on the smaller cam is 228 intake and 230 exhaust a .05 lift with max lift of .550. Their other cam, I run it with my car, is a little more aggressive. Its general specs are 114 LSA 234 and 234 intake and exhaust at .05 lift and max lift at .580. The LSA on this cam is better for blower cars I believe. The other cam looks to be good for a decent street N/A cam. I could be totally wrong with my knowledge on cam specs though. </p><p></p><p>FWIW, my car is just over 600hp and 533 torque. Max torque comes around 5k rpms and stays pretty flat till 6300 and slowly tapers down. Hp is over 500 at 5k rpms and hits 600 at 6k and slowly rises to 614 at 7k rpms with 16psi max boost. </p><p></p><p>I think the 270's will be better performer, imo. TFS cams are good but I think they could of been a bit better with a little less intake duration or more exhaust duration.</p></blockquote><p></p>
[QUOTE="Stanger00, post: 13363219, member: 128629"] TF cam profiles arent too much off from other manufactures. They have a 112 LSA and durations on the smaller cam is 228 intake and 230 exhaust a .05 lift with max lift of .550. Their other cam, I run it with my car, is a little more aggressive. Its general specs are 114 LSA 234 and 234 intake and exhaust at .05 lift and max lift at .580. The LSA on this cam is better for blower cars I believe. The other cam looks to be good for a decent street N/A cam. I could be totally wrong with my knowledge on cam specs though. FWIW, my car is just over 600hp and 533 torque. Max torque comes around 5k rpms and stays pretty flat till 6300 and slowly tapers down. Hp is over 500 at 5k rpms and hits 600 at 6k and slowly rises to 614 at 7k rpms with 16psi max boost. I think the 270's will be better performer, imo. TFS cams are good but I think they could of been a bit better with a little less intake duration or more exhaust duration. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Mustang Forums
SN-95 and New Edge Mustangs
stage 2 comp cams? Notched pistons?
Top