Steeda Oil Seperator Question? HELP!

RAZRS EDGE

Stay Humble
Established Member
Joined
Jun 10, 2004
Messages
4,084
Location
OKC
Hey guys, I was in the process of installin my oil seperator when i ran into a problem. i know this is a dumb question but i just want to get it right. Which way does it flow. It has an arrow up top for direction of flow. So does point towrds the drivers side and it come out of the PCV on the valve cover then go through the seperator and then out the other way? Or does the arrow face towards the motor? I'm just confused on which way it flows. :shrug:
 
Last edited:

Grey03

Active Member
Established Member
Joined
Jun 18, 2002
Messages
556
Location
OH
The pcv flows from the valve cover to back behind the intake. When you line it up you want to make sure that if you were to trace the flow from the valve cover back to behind the intake that the oil seperator is lined up in the same direction.
 

Grey03

Active Member
Established Member
Joined
Jun 18, 2002
Messages
556
Location
OH
Oh you can line it up either way, towards or away from the motor, depends on how you run the lines, it doesn't matter as long as you line it up so that it flows from the pcv to the back of the intake.
 

lucafu1

New Member
Established Member
Joined
Apr 29, 2004
Messages
1,809
Location
Tucson,AZ
Just put the pcv in your mouth and blow/suck. You'll figure it out.
 

Users who are viewing this thread



Top