Stock pulley size for Procharger on 01 Cobra

[Wicked]

I am trying to figure out what kind of boost I should be seeing and how bad my belt slippage is. The kit was originally on my 02GT and was a 10psi kit with a 3.2 inch pulley. Do any of you guys have Procharged 99-01 Cobras setup for either 10psi or 12 psi. What size is your pulley?

Oh its a P1SC.

Thanks.

 

[lemosley01]

Wicked - send it to me and I'll test it! j/k
Out of curiosity how much did it cost to convert the kit to work on your cobra?

 

[01svtbra]

This is the first time I've seen you over here Wicked.

 

[Wicked]

Originally posted by lemosley01
Wicked - send it to me and I'll test it! j/k
Out of curiosity how much did it cost to convert the kit to work on your cobra?

Nothing, I used the GT bracket and made it work. I wasn't about to spend 300 bucks on a cobra only bracket.

01svtbra, yeah I been here and there. My main hang out is the BM board. I just come here when I'm looking for info generally.

 

[snkbit99]

pulley size

If you look in the parts list that came with the kit it should say it there. I will try to find mine.
Ed

 

[Wicked]

Re: pulley size

Originally posted by snkbit99
If you look in the parts list that came with the kit it should say it there. I will try to find mine.
Ed

I've had the kit for over 2 years now and it was originally for a GT. I want to know what a Cobra uses.

 

[snkbit99]

Pulley size

My Packing list shows the 10psi pulley to be 3.90" 6 rib pulley and the 8psi pulley to be a 4.00" 6 rib pulley. Hope this helps.
Ed

 

[Wicked]

Re: Pulley size

Originally posted by snkbit99
My Packing list shows the 10psi pulley to be 3.90" 6 rib pulley and the 8psi pulley to be a 4.00" 6 rib pulley. Hope this helps.
Ed

Sweet man. Thanks.
Okay, well then I guess it makes sense for me to be seeing 13.x psi at the intake even with the 3 core intercooler with the 3.2 inch pulley.

 

[blown01cobra]

the cobra bracket is the same as the GT bracket.

 

[Wicked]

Originally posted by blown01cobra
the cobra bracket is the same as the GT bracket.

Not according to Procharger. I had to use washers to get my alignment right.