i've been searching the boards and have read a lot about our t45 tranny being really weak. if my tranny ever does go out or i ended up supercharging my cobra, what tranny would you recommend for replacing it?
thanks,
zac
thanks,
zac
Originally posted by 97 horse snake
what the hell happened to my signiture?
Originally posted by 97 horse snake
sweet, where's the cheapest place to get these online? would the steeda tri-ax for the t45 fit this tranny or should i hold off on buying that?
Originally posted by 1 BA SVT
I'm not sure about the cheapest place on line, but mine was about $1500. You'll have to get a new bell housing, a different clutch disk (the input shaft splines are different), and oblong the holes in your cross member. You might also need a different slip yoke for the rear driveshaft, I can't remember if the tailshaft splines are different on the 4.6 cars I know they were on my 5.0.
Also your shifter from the t-45 will not fit on the tremec, your's is a 4 bolt and the tremec's are a six bolt.
Originally posted by 97 horse snake
shit, sounds like a lot of work. was it $1500 for all of that or just for the tranny? thanks for the reply's. good lookin out.
zac