super charger removal

[mikeygfly]

i plan on porting my supercharger but before i remove it i would like to get all the necessary gaskets that go with it. does anyone know the ford part number of the gasket or seals i will need to complete the task? any tips or hints would help as well.

Thanks, Mike

 

[03cobra#694]

This should help some.
http://www.svtperformance.com/forums/how-230/343829-complete-how-write-up-thread.html

 

[mikeygfly]

sweetness! Thank you very much!!!!!!

 

[MVD]

You do not need any new gaskets or seals. I have removed/replaced my blower a half dozen times and am still using all OEM gaskets/seals.

The gaskets between the head/lower intake are reusable as is the steel crush gasket between the blower and lower intake. The only other gaskets you may encounter are between the rear inlet and blower and between the lower intake and IC adapter. If you are careful both can be reused.

 

[68_GT]

you might damage the intake plenum to blower paper gasket.

I'd replace the intercooler to blower bolts too when you put it back together.