Howdy all! I just had a front end alignment done after cutting about 7/8ths of a coil of the front and back of the mach. My alignment info is below. Does it look ok?
Front left:
Camber -1.2
Caster 3.8
Toe .16
SAI 20.1
Included Angle 18.9
Front right:
Camber -1.2
Caster 3.6
Toe .14
SAI 12.9
Included Angle 11.7
Front:
Cross Camber 0.0
Cross Caster .2
Cross SAI 7.2
Total Toe .30
Front left:
Camber -1.2
Caster 3.8
Toe .16
SAI 20.1
Included Angle 18.9
Front right:
Camber -1.2
Caster 3.6
Toe .14
SAI 12.9
Included Angle 11.7
Front:
Cross Camber 0.0
Cross Caster .2
Cross SAI 7.2
Total Toe .30
