TF/Posi ported eaton, TB and plenum

[sprusak1]

I'm moving up to a twin screw so the eaton has to go. I have a true forged ported eaton, posi ported TB and plenum, stock rails w/39lb injectors, stock rails have an AN fitting welded in for the fuel return line. I also have a 2.76 black quick change billetflow upper. Eaton has about 18k on it, with under 5k on the ported eaton and 2k on the tb/plenum

$900 for all

pics are available, if needed

 

[sprusak1]

I'll have to find the pics of the TB and plenum.

 

[sprusak1]

oh, and the 2 broken bolt were removed before re-installation

 

[sprusak1]

bump

 

[1BadAzzGT]

Interested in selling the BF2.76 upper separately?

 

[sprusak1]

no, thanks though

 

[sprusak1]

weekend bump

 

[mustangman36578]

how much power did this set up make?

 

[sprusak1]

506/498, 90+ in the shop, after several pulls to find a melted line near the EGR

 

[sprusak1]

I have dyno sheets here somewhere