The way a Cobra should launch!!

Joe Lynch

New Member
Established Member
Joined
Feb 22, 2001
Messages
434
Location
Midland, TX
From a week ago, in 4000 ft air. This was the first hard pass on new ET Drags and a new Wolfe Racecraft rear anti-sway bar setup with a little too much preload on the right side. I wasn't shifting hard on this pass. Launch on the 6800 rpm limiter, shift at 8000 rpm.

My little go-to-work car. Should have it in the 10s in 4000 ft air soon.

The date in the title has a typo, it was 3/13/04, not 3/23/04.

http://members.cox.net/joelynch15/pen3-13-04.mpg

The 60ft is good, in my opinion.

Joe
 

Joe Lynch

New Member
Established Member
Joined
Feb 22, 2001
Messages
434
Location
Midland, TX
4.56 gears, lots of chassis work, Houston Performance heads and cams, custom intake, NX 150 shot, SCT Flasher, BBK headers, JE flat top pistons. Kenne Bell BAP and BAS, '03 Cobra pump.

Joe
 

Users who are viewing this thread



Top