Was there anything you had to do... or is it a direct swap? anything need to be trimed or cut?
Aug 27, 2005 #1 S SVTJAY New Member Established Member Joined Feb 6, 2004 Messages 222 Location Bay Area, CA Was there anything you had to do... or is it a direct swap? anything need to be trimed or cut?
Aug 27, 2005 #2 unclesams_svt B.O.H.I.C.A Established Member Joined Aug 23, 2005 Messages 2,796 Location Las Vegas, NV I put a cd/tape combo out of a 02 f350 and all i had to do was trim the platic piece that slops down behind the stock radio only too a couple of min. I have an 01
I put a cd/tape combo out of a 02 f350 and all i had to do was trim the platic piece that slops down behind the stock radio only too a couple of min. I have an 01
Aug 27, 2005 #3 AZ ERIK 22's & a Whipple 4 shizzl Established Member Joined Mar 9, 2005 Messages 2,543 Location Tempe, AZ Your looking at minimal trimming of the plastic piece on the top of the dash. Even with a cordless dremel I did mine in about 4 minutes.
Your looking at minimal trimming of the plastic piece on the top of the dash. Even with a cordless dremel I did mine in about 4 minutes.