threw some's code's please help

[elmo0244]

my car threw two code's today a p1000 and a p0153.can anyone tell me what they mean and can i fix them. i cleared the p0153 with my predator but the p1000 is still there also will it mess up my car if i drive it? thank's

 

[elmo0244]

anyone?????

 

[RKANYZ]

p1000 is not a bad code. it just means you haven't completed a drive cycle yet. don't worry about it.

 

[elmo0244]

the p0153 is the one i'm really worried about.is there a quick fix for it?

 

[RKANYZ]

thought you cleared the 0153. anyway what is the description?

 

[yeasure]

P0153 - HO2S Sensor
Circuit Slow Response ----->See DTC P0133.
(HO2S-21)


P0133 - HO2S Sensor
Circuit Slow Response
(HO2S-11)

Description.......The HEGO Monitor checks the HO2S Sensor frequency and amplitude. If during testing the frequency and amplitude were to fall below a calibrated limit, the test will fail.

Possible Causes
* Contaminated HO2S sensor.
* Exhaust leaks.
* Shorted /open wiring.
* Improper fueling.
* MAF sensor.
* Deteriorating HO2S sensor.
* Inlet air leaks.

 

[RKANYZ]

it's not unplugged from the mid-pipe install is it? check that then monitor your o2's with your predator.

 

[elmo0244]

what should the 02's be reading?

 

[RKANYZ]

1-1 and 2-1 should switch around between 0 and 90. 1-2 and 2-2 should not move around much. if your sensor is plugged in but not working it will be alot slower than the other one.

 

[elmo0244]

thanks i'll check them out.

 

[elmo0244]

should both 02 sensors read the same thing at the same time or should they fluxuate.

 

[elmo0244]

i don't have the code anymore.i did have exhaust leak's that i fixed today.