Vacuum routing question. There are 3 nipples on back of blower (4 total). One large upper 1/2", an upper and lower 3/8", and the one on the plenum.
FRPS, Vac/Boost gauge, and upper nipple on boost bypass valve to 3/8" lower nipple back of blower. Boost side.
Small diameter canister vacuum to plenum. Vacuum side.
AC line from firewall to 3/8" upper on back of blower. Vacuum side.
Block off large 1/2" nipple (back of blower).
1) Does that sound right? If not, please school me.
2) How did you tie all the lines into one another so it doesn't look like a total hack job? So I don't end up with a bunch of T fittings, splices, and connectors.
Beginning tear down this weekend. Tork Tech is officially on its way.
Thanks guys.
FRPS, Vac/Boost gauge, and upper nipple on boost bypass valve to 3/8" lower nipple back of blower. Boost side.
Small diameter canister vacuum to plenum. Vacuum side.
AC line from firewall to 3/8" upper on back of blower. Vacuum side.
Block off large 1/2" nipple (back of blower).
1) Does that sound right? If not, please school me.
2) How did you tie all the lines into one another so it doesn't look like a total hack job? So I don't end up with a bunch of T fittings, splices, and connectors.
Beginning tear down this weekend. Tork Tech is officially on its way.
Thanks guys.