Torque booster on a 96-01 Cobra results?

[omj]

I've seen a ton of good feedback about using a wastegate on the 5.0bro motors and I'd expect to see some gains on the 96-01 cobras but not as dramatic as the higher powered coyotes. I have a stock HC/PSR 99 Cobra that is seeing about 12 psi w/ a Ti Trim using a 3.60" pulley. I'd like to pulley it up to max boost and wastegate the pressure over 12-13psi.

Also, if I'm seeing 12psi w/ a 3.60" pulley, and I put a pulley that is 10% smaller, would I see 10% more boost across the board?

 

[apex svt]

That would be a 3.6 to a 3.24, 10% increase in boost would only be 1.2 lbs. you will see much more than a 1lb gain dropping the pulley that much. I think the waste gate on a centri is a great idea. Major benefit to the power curve