Home
What's new
Latest activity
Authors
Store
Latest reviews
Search products
Forums
New posts
Search forums
What's new
New posts
New listings
New products
New profile posts
Latest activity
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
Cart
Cart
Loading…
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Search titles only
By:
Menu
Log in
Register
Navigation
Install the app
Install
More options
Change style
Contact us
Close Menu
Forums
Cobra Forums
2013-14 Shelby GT500
Track Pack Rear Diff Leak - ???????
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Snoopy49" data-source="post: 14689737" data-attributes="member: 138649"><p>^^^</p><p>This.</p><p></p><p>From the 2014 Mustang Service Manual.</p><p></p><p><strong>NOTE:</strong> Service refill capacities are determined by filling the axle to a level of 5mm below the bottom of the fill hole with the axle at ride height. </p><p></p><p><strong>If equipped with a differential oil cooler</strong>, Remove the axle plug and fill the axle with 1.89-2.01L (4-4.25 pt) of axle lubricant and a additional 4.0 oz of friction modifier additive, then use a scan tool to operate the oil cooler pump and add a additional 1.10L (2 pt) of axle lubricant and a additional 2 oz of friction modifier and install the filler plug. </p><ul> <li data-xf-list-type="ul">Tighten to 30 Nm (22 lb-ft).</li> </ul><p></p><p>You can operate the differential cooling pump by removing the differential fluid pump relay in the battery junction box and placing a jumper wire between pins 3 & 5.</p><p>I would make up a switch assembly consisting of 2 blade connectors , 2 pieces of wire and a single pole single throw toggle switch and keep it in my toolbox for future use. It will also come in handy for operating other pumps in the car.</p><p></p><p>[ATTACH]35104[/ATTACH]</p></blockquote><p></p>
[QUOTE="Snoopy49, post: 14689737, member: 138649"] ^^^ This. From the 2014 Mustang Service Manual. [B]NOTE:[/B] Service refill capacities are determined by filling the axle to a level of 5mm below the bottom of the fill hole with the axle at ride height. [B]If equipped with a differential oil cooler[/B], Remove the axle plug and fill the axle with 1.89-2.01L (4-4.25 pt) of axle lubricant and a additional 4.0 oz of friction modifier additive, then use a scan tool to operate the oil cooler pump and add a additional 1.10L (2 pt) of axle lubricant and a additional 2 oz of friction modifier and install the filler plug. [LIST] [*]Tighten to 30 Nm (22 lb-ft). [/LIST] You can operate the differential cooling pump by removing the differential fluid pump relay in the battery junction box and placing a jumper wire between pins 3 & 5. I would make up a switch assembly consisting of 2 blade connectors , 2 pieces of wire and a single pole single throw toggle switch and keep it in my toolbox for future use. It will also come in handy for operating other pumps in the car. [ATTACH]35104.vB[/ATTACH] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Cobra Forums
2013-14 Shelby GT500
Track Pack Rear Diff Leak - ???????
Top