the car is a 97 GT with a 4V swap. it is a built engine with 03 cobra heads and 03 mach1 front cover. i will post the pics of what we got from the whipple car. please give me some info on what i am missing so i can buy it all at once. this is the first time i'll be working on a terminator engine so i'm not familiar with the accessory drive system on them
i have the thermostat housing from the old setup if that will work.
so far i know i will need
front cover
crank pulley
alternator brackets
the idler and bracket that goes where the alt normally is on a 2V or Mach
maybe an oil cooler.
thanks for the help
i have the thermostat housing from the old setup if that will work.
so far i know i will need
front cover
crank pulley
alternator brackets
the idler and bracket that goes where the alt normally is on a 2V or Mach
maybe an oil cooler.
thanks for the help
Last edited:
