turbo nitrous hollefy dominator 2003 MACH 1 build

[Sonic605hp]

#twasjokng

lol ya cause 2500hp auto is boring :nono:

 

[iggster]

I'm guessing you meant to hit a "1" instead of a "2".

no this one is good up to 2500, it was expensive :mj: I wanted something I wouldnt have to worry about anytime soon, 1500hp I would still be iffy about. Especially since i have a 94 billet garret that is replacing the 80mm.

 

[VNOMIS]

no this one is good up to 2500, it was expensive :mj: I wanted something I wouldnt have to worry about anytime soon, 1500hp I would still be iffy about. Especially since i have a 94 billet garret that is replacing the 80mm.

Oh ok. I thought you meant the car was making 2500hp. My fault.

 

[iggster]

Oh ok. I thought you meant the car was making 2500hp. My fault.

no lol I cant afford that right now, I wish hahaha new turbo should put the car around 1800, knowing me though if I get more $$ then eventually maybe one day 2500.

 

[iggster]

so finally got it all wrapped up and made 2 videos, will be testing it soon.


https://www.youtube.com/watch?v=Ai6X62T07Ww


https://www.youtube.com/watch?v=Fml2cUFflKI

 

[mofobucs is a thief]

sick build man!

 

[iggster]

changed the vr cam sensor over to a hall affect to clean up the signal, no missfires at high rpm, also got the holley digital dash mount installed

 

[iggster]

Car is finally done!

I registered to race it at a local event in fontana, February 4th the small tire shootout. It will be competing against high 4 second low 5 second cars.

Here is a video of me playing around with it

 

[Almighty-One]

Awesome build and good luck at the race

 

[iggster]

Took the car out, best has been a 5.6 with a 1.47 60 foot, so I upgraded the suspension recently and added traction control (still on the stock 03 cobra motor with head studs and manley valve springs)

Here is a video it went 5.x at 100mph and some pics of some of hte progress, I plan on taking it out again very soon to see if i can manage a 5.30 or better

 

[iggster]

besides the upgraded suspension and traction control I have also added a 300 shot progressive kit and its about 70lbs lighter.


https://www.facebook.com/photo.php?...9.-2207520000.1508549591.&type=3&size=960,720

https://www.facebook.com/photo.php?...310419.-2207520000.1508549591.&type=3&theater

 

[iggster]

I made my own traction control through the holley using a driveshaft sensor and a front wheel speed sensor, it pulls x amount of nitrous first depending on slip and then timing and finally boost if things get out of control to much

 

[iggster]

went to borona last weekend, tested the parachute in this pass so we let off half track, it went 5.88 at 119mph on 25lbs and 100 shot, we got it up to 33lbs and 200 shot. ( grudge car no numbers on that) stock termi motor with head studs and valve springs now!

 

[heffs03mach1]

I'm guessing you meant to hit a "1" instead of a "2".

did he??

 

[iggster]

big updates!

upgraded to a 91mm gtx gen 2 5533r turbo
raised compression
teksid build with custom diamond pistons

 

[MG0h3]

hahahha bro that turbo dominates the engine bay! Awesome!

 

[98 Saleen Cobra]

How do u like the haltech sensors? I just replaced my stock ones with new stock ones. Cleaned up a little. I was getting big rpm errors past 7400

 

[iggster]

first transbrake test with the new motor and 91mm gen 2, 6lbs of boost in 4 seconds, i think i can get it to 8lbs in about 3 seconds with some tuning

 

[Coiled03]

hahahha bro that turbo dominates the engine bay! Awesome!

That's not a turbo. That's a singularity at the bottom of a black hole.

Good grief...

 

[iggster]

got it out for the first time with the new setup