TVS GT500 vs VMP Terminator Cobra

[Bokeo]

Great match up, I love the sound of 2 Supercharged V8's hauling ass.

2012 GT500 - TVS, Intake, TB, Exhaust, 91 Lund Tune

03/04 Cobra - VMP, Full Bolt ons, Built motor, 04 Sleeper E85 Tune

[Youtube_browser]WMhCZkkaG34[/youtube_browser]

 

[mtb01]

Great vid. I miss my Cobra

 

[BrokenCool]

What was the mph on the rolls?

Cobra should of left it in 3rd. He shifted as soon as the run began.

 

[HandBanana]

can't see video.

 

[Jefe]

Dyno #s?

 

[2011 gtcs]

Both cars ran strong, I thought the terminator would do a little better than it did, but still some great races

 

[elcobrita]

Both cars ran strong, I thought the terminator would do a little better than it did, but still some great races

What was the mph on the rolls?

Cobra should of left it in 3rd. He shifted as soon as the run began.

First run was a 40mph roll. I was at around 3k rpm. I shifted quick because I roasted the 555s and RPM shot up.

Run #2 and #3 were 50ish and I was at around 3800 rpm. Still spun through 2nd and a little on 3rd but not as much as the first run.

I think if i had some radials I wouldve done alot better. Im still on stock manifolds and on 17-18psi

 

[elcobrita]

Thanks for the vid Keola :beer:

Think you can setup a run with the Terminator swapped GT?

 

[Gilberto Barron]

Sub.... Great vid btw!!!

 

[Bokeo]

Sub.... Great vid btw!!!

Thank you Gilberto!

Thanks for the vid Keola :beer:

Think you can setup a run with the Terminator swapped GT?

Yes Sir, no problem. I'll txt him. Hopefully his 5th gear issue is fixed.

 

[stangfreak]

Both cars ran strong, I thought the terminator would do a little better than it did, but still some great races

That's what happens when you spin.

 

[stangfreak]

First run was a 40mph roll. I was at around 3k rpm. I shifted quick because I roasted the 555s and RPM shot up.

Run #2 and #3 were 50ish and I was at around 3800 rpm. Still spun through 2nd and a little on 3rd but not as much as the first run.

I think if i had some radials I wouldve done alot better. Im still on stock manifolds and on 17-18psi

If your on e85 I would run that tvs on 21-22lbs, get some long tubes and tires. Your car will flat out be an animal. You spun and still caught up. For 17lbs thats bad ass. nice runs

 

[whitedevil95]

First run was a 40mph roll. I was at around 3k rpm. I shifted quick because I roasted the 555s and RPM shot up.

Run #2 and #3 were 50ish and I was at around 3800 rpm. Still spun through 2nd and a little on 3rd but not as much as the first run.

I think if i had some radials I wouldve done alot better. Im still on stock manifolds and on 17-18psi

Your on 555s??? Get rid of that crap and get some Mickey Thompson drags. I can always dead hook second gear from a 40 roll.

 

[Blk03CobraVenom]

Very nice! Love my VMP on my 03. Can't wait to one day go E85 as well. BTW nice lightning bolt at 1:20.

 

[elcobrita]

If your on e85 I would run that tvs on 21-22lbs, get some long tubes and tires. Your car will flat out be an animal. You spun and still caught up. For 17lbs thats bad ass. nice runs

I don't want to do a lower.

I have a 2.6 on it but thanks to me living in a hot desert that's 3800ft above sea level I see about 2lbs less than I did in places like San Antonio. In the winter I'll see about 19lbs here.

I'm gonna try the 2.5 out

 

[Bokeo]

I don't want to do a lower.

I have a 2.6 on it but thanks to me living in a hot desert that's 3800ft above sea level I see about 2lbs less than I did in places like San Antonio. In the winter I'll see about 19lbs here.

I'm gonna try the 2.5 out

Hey man, Terminated Whipple GT says hes down to run, but probably in a couple weeks. Hes getting a retune

 

[elcobrita]

Your on 555s??? Get rid of that crap and get some Mickey Thompson drags. I can always dead hook second gear from a 40 roll.

Yea I'm on regular 555s. I'm just waiting to get some more use outta these before I toss them.

 

[Sn95Snake]

Nice kills!

 

[D1SC_GT]

Great vid as always Sean. Elcobrita that car is screaming for some ET streets!

 

[2011 gtcs]

First run was a 40mph roll. I was at around 3k rpm. I shifted quick because I roasted the 555s and RPM shot up.

Run #2 and #3 were 50ish and I was at around 3800 rpm. Still spun through 2nd and a little on 3rd but not as much as the first run.

I think if i had some radials I wouldve done alot better. Im still on stock manifolds and on 17-18psi

I didn't no you were running 555s. At'least jump up to some NT05Rs, Either way you can tell your cobra runs strong on the top end.