upgrading TOB?

[87FOXGT]

I will be putting a CF DFX clutch and CF aluminum flywheel in my car. I figure while its all apart, why not get the CF TOB. But i am also wondering what else to upgrade in the TOB assembly since i have no idea what to do/not do. Can anyone give me any direction on what else to swap out while its all apart and where i can buy the parts? THanks in advance for the help!

 

[87FOXGT]

ttt cmon guys i know there are heavily modded guys on here that have done this! help please!

 

[SA SNAKE]

TTT... Wondering Also...

 

[Tom's_03SVT]

if youve got the $$$ why not do the 26 spline input shaft upgrade. if you dont want to go that route then you should at the very least replace the TOB guide tube they usually end up fracturing. they are about $80 from Summit, Mcloed makes one thats pretty good.

Tom

 

[badcobra]

Do the 26 spline shaft for sure, and the Mcleod sleeve. When I took my trans out to do the swap, the stock TOB tube was broken off. Since I put it all back together, it shifts like butter now!

http://www.libertysgears.com/newreleases.htm

http://store.summitracing.com/defau...rt=MCL-8-118-1&autoview=sku&Ntk=KeywordSearch

 

[87FOXGT]

thanks for the info badcobra!!!

got my DFX setup waitin at home, now just gotta order the sleeve and im good to go!