Anyone that has installed the UPR 3 hook extreme quadrant and FW adjuster I have the following question. Were you able to get 1/8 inch TOB clearance and have the clutch engage further off the floor than the stock setup?
I used UPR quandran part # 3004-K-EXT, I added a spring to pull the TOB off the pressure plate 1/8 inch, with this adjustment the clutch engages with the pedal just 1/2 inch from the floor.
The add on UPR site says "quicker release" but it seems the ramp is just as long as the stock quadrant.
Help if you can.
I used UPR quandran part # 3004-K-EXT, I added a spring to pull the TOB off the pressure plate 1/8 inch, with this adjustment the clutch engages with the pedal just 1/2 inch from the floor.
The add on UPR site says "quicker release" but it seems the ramp is just as long as the stock quadrant.
Help if you can.
