using a marauder engine in my 1965 F100. ..some e gine and fuel questions

[91svtcoupe]

Im currently swapping an 03 mercury maruader engine and transmission into my 1965 F100

I need to work out my fuel set up to a return style and I am looking at swapping intakes to do this....

What intakes will swap over to the mercury engine....and allow me to use the return style fuel rails with out going to a complete fuel rail assembly

 

[musclemerc]

You can use an intake for any COP 4v. Mach1, 99 Cobra, Sullivan, Hogans, NASVT, Avaitor, etc.....

Same for the fuel rails. If if can bolt to a COP intake it will bolt to the Marauder intake

Did you get the front suspension off the wreck? It wil bolt right up to your F100 frame and will give you rack and pinion, struts, A frame upper and lower control arms, and save Aton of weight off the front of the truck

 

[captslow]

Uhhhhh, not entirely true, since some of the B head intakes were COP. But any C head intake will work.

As far as the fuel rails, just use the stock returnless rails and set up a dead-head system with an external regulator before the rails.