Vehicle Speed Sensor?

[NukeX]

Ok so today I'm trying to install my NAV system and it needs a hookup for a vehicle speed reading. My question is does anyone know what/where I Might be able to find a wire to tap into that has this information (without going behind the gauge cluster directly) Any info would be appreciated. Thanks!!!

-Steve :beer:

 

[78mphgpr]

It is whit/orange, pin # 68 at the ECM behind the drivers kick panel.

 

[Dana]

Dpending on the signal required, you may be able to get it at the PCM.
Its pin 68 for the VSS+ (circuit 239) WH/OG.

Dana

 

[NukeX]

WOW! Thanks Guys!!!!!

Terry - I'm finally getting around to installing the units and now it doesn't look to difficult at all!!! Thanks again for the information on the harnesses!!!!

-Steve

 

[Dana]

Picture of location.

Dana

 

[78mphgpr]

No problem. You can remove the radio mounting bracket off of your factory head unit and attach it to your aftermarket to avoid fabing a bracket. Glad all the part #'s worked for you. Did you have trouble finding them?