vibration above 3000 rpm

10th annv cobra

Member
Established Member
Joined
Jun 3, 2010
Messages
65
Location
Louisville Ky
Hey guys any help would be greatly appreciated. I have a vibration above 3000rpm especially noticeable in 5 gear around 85mph. Car has also had a loose feeling coming from the rear. Ive had it up in the air checking it over and over for play and loose parts. I did find the rear sway bar link loose and tightened that but still seems the same. Recently had a clutch put in the car and had the factory flywheel ground and afterward found that the flywheel is not supposed to be ground but friction disc unrivoted and replaced. I'm wondering if the vibration could be from the flywheel, the whole front surface was ground smooth when I picked it up just as a solid flywheel would be if it were ground. I didn't have the vibration or loose feeling previous to the clutch however it could be a coincidence. The clutch engages smooth and holds good. Any thoughts. Anyone had similar symptoms with there Terminator?
 

Users who are viewing this thread



Top