VMP snout bolt rusty

[99cobraUgotbit]

i have had some bogging issues with a few misfire codes. I finally have some time to replace the plugs. I hardly ever drive her and hardly lift up the hood. I know know shame on me. But the first thing I noticed was the top right bolt was brown and rusty.

My question is what bolt specs do I need? And do I have to remove blower to install if I take the belt off the upper pulley. Thanks!

 

[RedVenom48]

Is that a quick change pulley system from VMP youre talking about?

When i had my TVS, i swapped out the allen bolt that were provided in the VMP quick change kit for metric 10.9 rated galvanized bolts.

I think they are either 6mm x1.0 pitch or most likely 8mm x1.25

 

[99cobraUgotbit]

 

[Imatk]

That's just a little surface rust.

I'd get some of that rust converter and just brush it on there

 

[99cobraUgotbit]

The bolts are ugly regardless.

Anyone know bolt specs?

 

[HillbillyHotRod]

Never mind, wrong item

 

[HillbillyHotRod]

If they are the same as the VMP, I was told to just snug them up.