Vortech Supercharged Cobras...

S.C.L.A.98COBRA

Member
Established Member
Joined
Jun 27, 2003
Messages
373
Location
LOS ANGELES (SOUTH CENTRAL)
I have a V-1 Vortech charger and need to replace the spark plugs...I just wanted to know what are the best spark plugs for my ride? I've read that copper tip (what brand) are the best when charged? Also, how much do I gap them?

Last, my cable/hose that runs from the oil pan that feeds the oil to the supercharger has a small leak, it drops a few drops every now and then. Where can I buy a new hose? And is it easy to swap from an old one to a new one?

Thanks
 

S.C.L.A.98COBRA

Member
Established Member
Joined
Jun 27, 2003
Messages
373
Location
LOS ANGELES (SOUTH CENTRAL)
93cobra#3326 said:
have you tried tightening the hose clamps?


I've tightened before...And it seems that come loose over time??? You know where I can purchase a new one...just to be on the safe side?

"Motorcraft AWSF22C's gapped at .032. Nothing out there better!!"
Where can I get these? Can I go pick them up at a local auto part shop like NAPA, Autozone, or Pep Boys?

Thanks for the replys....
 
Last edited:

93cobra#3326

i love boost!
Established Member
Joined
Mar 1, 2004
Messages
1,056
Location
Raleigh NC.
BEEFEDMOD said:
Motorcraft AWSF22C's gapped at .032. Nothing out there better!!

even better than the latest Iriduim plugs out there :rolleyes: :nonono:

i dont hink it matters what the hose is made of. go to autozone and buy some rubber hose thats the same diameter
or look at the supercharger manufacturer for one
 

dtd01svt

Active Member
Established Member
Joined
Aug 20, 2003
Messages
1,087
Location
ohio
If your interested, I think I have an extra hose for that set-up. Make me an offer......

Dave
 

Users who are viewing this thread



Top