guys, i want to go KB so the Vortech has to go. i bought it almost new from 00virginiastang on www.modulardepot.com and put about 8K on it. also, i cleaned it up and added some goodies. the kit is for 00+ but i bought the idlers, etc and am using it on my 99. most of the parts you have to modify, i have provided so you dont have to use your originals.
-hand polished Vortech V1 S trim supercharger
-3.6in Vortech pulley (8-10psi of boost)
-3.33in Vortech pulley (10-12 psi of boost)
-99-02 Mustang GT bracket with Vortech installation kit and extra idlers
-2 belts (one for each pulley; either can be used as spare)
-Bosch bypass valve and vacuum hose
-Upper (extended) radiator hose-dont cut your stock hose
-Anderson Ford Motorsport Jet Hot coated 4 in Power Pipe (increases boost 2 psi)
-Diablo Sport Evolution EEC chip (for tuning with Diablosport products)
-Superchips Xcalibrator II flash tuner/datalogger/OBDII code reader (for SCT tuning software)
-8 x Autolite 764 sparkplugs (one heat range colder for supercharger; new in box)
-90mm Ford Lightning MAF sensor (calibrated for 42 lb injectors)
-80mm MAF sensor (older Lightning; for use as core charge)
-8 x 42lb/hr FRPP greentop fuel injectors
-Threaded Ford Lightning IAT sensor (new in box; replaces OEM; wont blow out)
-K&N air filter modified to work with 90mm Lightning MAF without needing extra bracket
[img=http://i80.imagethrust.com/t/809271/picture011.jpg][img=http://i80.imagethrust.com/t/809272/pict0011.jpg][img=http://i80.imagethrust.com/t/809273/picture089.jpg]
great kit with two boost setting pullies 8-12 lbs with powerpipe. all you need is a pump. my pics dont do it justice as i haven't had time to clean underhood$2800 obo
-hand polished Vortech V1 S trim supercharger
-3.6in Vortech pulley (8-10psi of boost)
-3.33in Vortech pulley (10-12 psi of boost)
-99-02 Mustang GT bracket with Vortech installation kit and extra idlers
-2 belts (one for each pulley; either can be used as spare)
-Bosch bypass valve and vacuum hose
-Upper (extended) radiator hose-dont cut your stock hose
-Anderson Ford Motorsport Jet Hot coated 4 in Power Pipe (increases boost 2 psi)
-Diablo Sport Evolution EEC chip (for tuning with Diablosport products)
-Superchips Xcalibrator II flash tuner/datalogger/OBDII code reader (for SCT tuning software)
-8 x Autolite 764 sparkplugs (one heat range colder for supercharger; new in box)
-90mm Ford Lightning MAF sensor (calibrated for 42 lb injectors)
-80mm MAF sensor (older Lightning; for use as core charge)
-8 x 42lb/hr FRPP greentop fuel injectors
-Threaded Ford Lightning IAT sensor (new in box; replaces OEM; wont blow out)
-K&N air filter modified to work with 90mm Lightning MAF without needing extra bracket
[img=http://i80.imagethrust.com/t/809271/picture011.jpg][img=http://i80.imagethrust.com/t/809272/pict0011.jpg][img=http://i80.imagethrust.com/t/809273/picture089.jpg]
great kit with two boost setting pullies 8-12 lbs with powerpipe. all you need is a pump. my pics dont do it justice as i haven't had time to clean underhood$2800 obo
