Weld Rts wheel fitment issues? - which brake lines do I order?

[dragracingfreak]

I have a set of 15x10 Weld Rts with 6.5 bs. I have read and heard that you need to grind the banjo bolt and edge of the brake line that the bolt goes through. I have done that and I'm not comfortable with it like that. Just hasn't got much left on the bolt. Which maximum motorsports brake line kit do I need to get? This is on a 96 cobra btw.
Is it this one, http://www.maximummotorsports.com/M...iper-Hose-Kit-1994-95-Mustang-rear-P1222.aspx. ik it's listed for 94-95, but they don't have any listed in the 96+ section and I heard these are the ones to get. Thanks for any help.

 

[F8L BYT]

You'll be fine if you want to run it, I've been doing it for years... but if you need something, you can just get the Earl's performance low profile banjo bolt and it should be fine

 

[dragracingfreak]

Ok thanks. Is the bolt a m10 x 1.00 single steel bolt? Or a m10 x 1.25

 

[dragracingfreak]

Which banjo bolt do I need to get, I've been looking up and it seems to be different for other year cobras. I just don't know how long it needs to be for the rears on the stock lines. That and whether it is coarse or fine threads?

Part #'s would be very helpful to which ones I need.