what are the stock shift points? Fade?

[cthunder]

basically, I just bought a sniper tuner and want to know some shift points so I can rock out with my cake out. Fade 2 Black, I know you do your own tuning so please chime in!

 

[Fade 2 Black]

You can't look at a stock calibration and see what's what?

Stock shift RPM settings: 1-2 is 5270, 2-3 is 5290, 3-4 is 8000
Stock shift for MPH: 1-2 is 42.5, 2-3 is 78, 3-4 is 117.5

 

[02SILVERBULLET]

You can't look at a stock calibration and see what's what?

Stock shift RPM settings: 1-2 is 5270, 2-3 is 5290, 3-4 is 8000
Stock shift for MPH: 1-2 is 42.5, 2-3 is 78, 3-4 is 117.5

8k?:dw: lol

 

[FordFanStan]

I think that was a typo...

 

[voodoocustoms]

You can't look at a stock calibration and see what's what?

No, with the sniper you get to make changes "up or down from stock". It does not use numeric values. Hence my question. What is the stock timing? Thank you.

 

[I'D WIN]

8k is right but that is for WOT.

With Sniper ...

Be more specific! Which Sniper platform are you using?

If you are using the standard Special Forces then NO, you can't see what the stock tune has for each variable. If you have the Commando or the Delta Force software, then YES you can compare and modify as desired.

What all are you trying to accomplish and what mods are you running?

 

[FordFanStan]

8k ... Theres only very few guys out there who run 2v's up to 8k... Stan

 

[Derek@Amazon]

8k ... Theres only very few guys out there who run 2v's up to 8k... Stan

as high as i spin my motor up im still a a lil short of 8000

 

[cthunder]

You can't look at a stock calibration and see what's what?

Stock shift RPM settings: 1-2 is 5270, 2-3 is 5290, 3-4 is 8000
Stock shift for MPH: 1-2 is 42.5, 2-3 is 78, 3-4 is 117.5

I dont think so... I was just getting everything in line before I install everything and start to fine tune the system. Thanks!

8k is right but that is for WOT.

With Sniper ...

Be more specific! Which Sniper platform are you using?

If you are using the standard Special Forces then NO, you can't see what the stock tune has for each variable. If you have the Commando or the Delta Force software, then YES you can compare and modify as desired.

What all are you trying to accomplish and what mods are you running?

it is the special forces software I believe. I have a built JLP stage 3 engine with 2.6KB, JLP R exhaust and a ton of other stuff. basically I want to go deep into the 10's all boost.

 

[Lightningfr]

8k WTF!!!!

 

[I'D WIN]

8k is for WOT. The truck will top out before it ever reaches that high of an RPM not to mention other tables that have to be adjusted to even get it anywhere above and beyond 5650 RPM's.