What Belt length do I need

[Jmurrz]

Moved to Terminator Talk for more exposure!

Yes, another belt length thread. I have stock idlers (I know, I know) with a Metco 100mm snub idler. I have a 3" upper pulley and stock lower. If it were an eaton it would be a simple trip to CobraBob's site but it is for a Gen 2. 2.3 Whipple.

Thanks in advance!

 

[Jmurrz]

Accepting guesses at this point. LOL

 

[03cobra#694]

Accepting guesses at this point. LOL

12", but really, give them time.

 

[Jmurrz]

12", but really, give them time.

12" Would make for a pretty snug fit... No belt slip here :coolman:

 

[MalcolmV8]

Why not mock up the belt you have and see how short you are and then head to your local autoparts and get one? If it's to long or to short swap it out till you have the right one.

 

[Givens]

http://www.modularfords.com/threads/52124-Whipple-Belt-sizes/page6

 

[03cobra#694]

Per the spreadsheet in the link above, you'll need a 75.5"

 

[03cobra#694]

OP, stock alt pulley?

 

[Jmurrz]

http://www.modularfords.com/threads/52124-Whipple-Belt-sizes/page6

Exactly what I was looking for, Thanks!

Per the spreadsheet in the link above, you'll need a 75.5"

OP, stock alt pulley?

Yes, stock Alt pulley. 75.5 looks like it will do the trick! Thanks!