- Joined
- Feb 1, 2015
- Messages
- 103
Basic stuff like degreaser and simple green
Sent from my iPhone using the svtperformance.com mobile app
What did you do for your Terminator today?
- Thread starter mrose75
- Start date
Basic stuff like degreaser and simple green
Sent from my iPhone using the svtperformance.com mobile app
I use this stuff from Lowes called Krud Kutter. Then after I let it soak for about a minuet I use my power washer to rinse it off. Stuff works great.
I only post this link so you can read about the product as I cannot post pictures right now (at work). I'm not trying to endorse anything.
https://www.lowes.com/pd/Krud-Kutter-32-fl-oz-All-Purpose-Cleaner/1009827
Link says you cannot buy it online, but it is available on the shelf.
I appreciate it man! Thanks. Gotta get it ready for a show this Sunday. Thanks you guys for the responses.
Sent from my VS995 using the svtperformance.com mobile app
Put some led license plate bulbs in.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I'll be at that same show. I'll be parked with an OW 03 with a black roof and a 10th anniversary vert. Stop by and say hi.
As for cleaning my engine bay, I use quick detailer mostly. But my car isn't a daily and gets cleaned pretty regularly.
That is totally awesome! I didn't realize speedhut made digital widebands now. I may need to order one up. What wideband controller are you using with it?Speed hut digital wideband that trbovnm hooked me up with.
Looks good! Nice job.Tossed on a 2.3L whipple and had 04sleeper tune her up. Beyond happy with how she turned out.
- Joined
- Feb 1, 2015
- Messages
- 103
I'm using the AEMs X series UEGO. Part number is 30-0310 if you're interested in it.
Today, I started making headway on my VW headlight switch project.
So, finally got into a position where I can work on the car and it runs. Long story short, the alternator went out in the fall and I was just mad at the car, so I made no progress.
The old relay board is gone and has been replaced with a much better setup. The old one wasn't going to cut it and I was having to make too many concessions to make it work. So, I decided to go a different way.
This modular system holds six micro relays that are 25A each. That should be plenty for all the lighting circuits. I have a friend with a laser etcher, so I decided to church up the relay holder a little bit to help myself ID each relay down the road. This was that result:
And finally, some laser etcher porn:
I should be able to have this installed and working this weekend.
So, finally got into a position where I can work on the car and it runs. Long story short, the alternator went out in the fall and I was just mad at the car, so I made no progress.
The old relay board is gone and has been replaced with a much better setup. The old one wasn't going to cut it and I was having to make too many concessions to make it work. So, I decided to go a different way.
This modular system holds six micro relays that are 25A each. That should be plenty for all the lighting circuits. I have a friend with a laser etcher, so I decided to church up the relay holder a little bit to help myself ID each relay down the road. This was that result:
And finally, some laser etcher porn:
I should be able to have this installed and working this weekend.
Fabulous fords forever? Sweet! I'll be in the snake pot as well with my 03 SB very. I'll be sure to keep an eye for you guys.
Sent from my VS995 using the svtperformance.com mobile app
You might want to look at aeroforce as they weren't that much more than a speedhut. You can also add other items to it. My single aeroforce does boost and wideband. Plus you can read pids and dtc.
Yes sir. We've been going since 2005. It became a tradition pretty quick.
Thats cool! Make sure you get some video of it in action!Today, I started making headway on my VW headlight switch project.
So, finally got into a position where I can work on the car and it runs. Long story short, the alternator went out in the fall and I was just mad at the car, so I made no progress.
The old relay board is gone and has been replaced with a much better setup. The old one wasn't going to cut it and I was having to make too many concessions to make it work. So, I decided to go a different way.
This modular system holds six micro relays that are 25A each. That should be plenty for all the lighting circuits. I have a friend with a laser etcher, so I decided to church up the relay holder a little bit to help myself ID each relay down the road. This was that result:
And finally, some laser etcher porn:
I should be able to have this installed and working this weekend.
Thats looking sharp Kurt! And im loving the license plate!
Finally got these in and kind of don't want them
What color is your car and rims. I have a variation of that on my rims.
What color is your car and rims. I have a variation of that on my rims.
It's black, I got them because I was going to trade for some cobras but the guy sold his car the day I was driving up to trade the wheels. An hour and a half into the trip. I may just get rid of these things
Users who are viewing this thread
