What do these codes mean?

Venom55

Member
Established Member
Joined
Feb 21, 2005
Messages
66
Location
Greenville SC
My check engine light is on so i had it read, these are the two i did not understand:

DTC P0122
TPS/Pedal Position
Sensor A
Circuit Low Input

DTC P1151
H02S Band 2 Sen 1
Insuff. Switching
Lean Mean

If anybody knows what this means please tell me.

Thanks

Mike
 

Speed Demon

Member
Established Member
Joined
Dec 6, 2004
Messages
595
Location
Atlanta, GA
the po122 means the computer isnt reading enough voltage from the throttle position sensor, most likely a bad tps, the p1151 means that the upstream, or the one nearest the exhaust manifold, oxygen sensor on the drivers side is reading a lean condition, most likely a vacuum leak or exhaust leak on the drivers side, or a bad o2 sensor, also check to make sure all grounds are making good contact
 

Venom55

Member
Established Member
Joined
Feb 21, 2005
Messages
66
Location
Greenville SC
werd, well i cleaned all the contact points with that electronic cleaner stuff and the car runs a little better. i have a new tps so i'll change that out sunday and see if there's a difference.
 

Users who are viewing this thread



Top