What else would you get?

[1969+GT500]

Am I missing anything needed for performance build?

2008 GT500 rebodied to 69 mustang

Going to be buying a Line Lock Kit. Wheels and tires once I return (have to measure to get appopriate size).

Already purchased:

Engine

2013 2.3L TVS S/C
DI1000 1000cc Fuel Injectors
VMP Mono Throttle Body
MSS Auxiliary S/C Tensioner
STEEDA Oil Seperator Kit
Cat-back Exhaust
Steeda Cold Air Intake
Kenne Bell Boost-A-Pump
Borla Headers
Steeda 2.7 Pulley
SCT X4 Tuner

Transmission

PRO 5.0 Shifter
Aluminum Driveshaft
Braided transmission line
ExedyMach 700 Stage 4 clutch

Suspension

UPR LCA Adjustable control arms
UPR Adjustable motor mounts
UPR LCA relocation brackets
Eibach Pro-kit Springs
BMR Adjustable Panhard Bar
Viking Double Adjustable shocks
Strange Single Adjustable Struts
GT500 Strut Mounts
BMR UCA + Mount
Brake Motive drilled slotted rotors

Sent from my VS985 4G using the svtperformance.com mobile app

 

[1st usa car]

why do you need such big injectors????? what are your goals for the build?

 

[1969+GT500]

why do you need such big injectors????? what are your goals for the build?

Honestly just daily street use with some extra ponies. If bored can crank the car up. I bought the ID1000 because from reviews and this forum they were the most adjustable. I haven't pulled the trigger yet but plan on buying SCT pro racer so that I can learn to tune. It will go on stages start out modifing a few things and working on the tune until I eventually get everything installed. Moddest I want to run DD is 600Rwhp but knowing it has the potential for 650 to 700 is nice. Over this next year I'm going to focus on frame stiffening and items like k-member and other front end components. I'm building this car to keep forever. Will start working on building a s/c coyote motor eventually to replace the 5.4

Sent from my VS985 4G using the svtperformance.com mobile app

 

[1st usa car]

overkill on injectors --

 

[RedVenom48]

Nah, ID 1000s are fine. More than enough fueling potential with them and the KB BAP. Easier to swap to E85 if you already have the injectors and BAP. Return fueling system would be all you need for the swap.

With everything youve got, i think youll be at or over 670 rwhp. Maybe consider a 2.5 upper ro push you over 700

 

[devilish64]

Absolutely not overkill on injectors

 

[jayames]

Upgraded heat exchanger and a thermostat would be my next purchases.

 

[RedVenom48]

Upgraded heat exchanger and a thermostat would be my next purchases.

Well said. OP Id, consider those two items (Dual fan HE and 170 T-stat) to be mandatory for your build.

 

[1969+GT500]

I have larger heat exchanger, forgot to add it, plus upgraded the pump to 2013 pump. I also have N2MB WOT box. I'll look into fans and thermostat. Thanks

Sent from my VS985 4G using the svtperformance.com mobile app

 

[1969+GT500]

Purchased 170 thermostat. Since I already have heat exchanger any recommendation on aftermarket fans? Doing more research looks like a lot of garbage on the market.

Sent from my VS985 4G using the svtperformance.com mobile app

 

[RedVenom48]

Depends on how tall your HE is. VMP sells a fan controller harness that starts and stops off the intercooler pump.

For fans id get the highest cfm flow SPAL fans i could find