What fuel setup for supercharged 01

98_Undertaker

Well-Known Member
Established Member
Joined
Sep 9, 2009
Messages
1,276
Location
Lexington Ky
Looking to go to 600 maybe 650 tops, just trying to get an idea of what I need.

I remember reading 03/04 tank was needed for the eaton swap but with the amount of vortech and procharged cars running around I cant see how they don't need it where the eaton does...
 

01yellercobra

Well-Known Member
Established Member
Joined
Oct 5, 2005
Messages
21,305
Location
Cali
I ran a terminator set up in my 01. With twin GT pumps and wire upgrade I made it to about 600hp with it. It's not needed for the eaton swap, but it has more room to grow with running two pumps.
 

98_Undertaker

Well-Known Member
Established Member
Joined
Sep 9, 2009
Messages
1,276
Location
Lexington Ky
Setup will be a ported eaton 2.93/6# combo and 9.5:1 C/R or around there.

So 600 will be the extreme top end if I end up going higher C/R and E85
 

01yellercobra

Well-Known Member
Established Member
Joined
Oct 5, 2005
Messages
21,305
Location
Cali
Keep it above 1/4 tank and you should be ok. I ran that set up for a bit. But ended up switching to a termi tank eventually.
 

OW99

Member
Established Member
Joined
Apr 26, 2012
Messages
550
Location
north houston
600-650 on e85 I would go return style with a walbro 465 and 80lb injectors. Or if you like to stay returnless (don't know why) then twin walbro fgt style pumps and two fpdms with the same injectors. No need to spend money on a tank or those God awful overpriced retarded hats if you're willing to do a little modification and keep it above 1/4 tank like said above.
 

Users who are viewing this thread



Top