What is the RPM Limit on a Stock...

[SStampede]

GT500 bottom end?

Thanks.

 

[IA Shelby]

My tuner set the rev limiter at 6500 when I had it tuned.

 

[stkjock]

stock limiter is at 6250 IIRC

if you are tuning in I would not set it above 6500 - RPMs is what kills the stock motors

 

[VNMOUS1]

stock limiter is at 6250 IIRC

if you are tuning in I would not set it above 6500 - RPMs is what kills the stock motors

This. I run mine to 6700 but it's tuned within an inch of its life and ONLY runs on C16.

Keep it at stock limiter if you have it tuned and you're not 110 percent positive about your fuel source.

Bj

PLEASE REACH ME VIA EMAIL AT [email protected] AS OPPOSED TO PM. THANKS.

 

[IA Shelby]

This. I run mine to 6700 but it's tuned within an inch of its life and ONLY runs on C16.

Keep it at stock limiter if you have it tuned and you're not 110 percent positive about your fuel source.

Bj

PLEASE REACH ME VIA EMAIL AT [email protected] AS OPPOSED TO PM. THANKS.

Then why would my tuner set it at 6500? You might know him.


Sent from my iPad using Tapatalk HD

 

[VNMOUS1]

then why would my tuner set it at 6500? You might know him.

We set them all there. What you do with it is up to you. He was asking about limits.

That said, if you're running 18+psi and a track tune and buying your gas at the corner station, i don't suggest over-revving it.

Bj

sent from my ipad using tapatalk hd

please reach me via email at [email protected] as opposed to pm. Thanks.

 

[stkjock]

That said, if you're running 18+psi and a track tune and buying your gas at the corner station, i suggest never over-revving it.

Fixed

 

[VNMOUS1]

Fixed

Close enough

PLEASE REACH ME VIA EMAIL AT [email protected] AS OPPOSED TO PM. THANKS.