What mods have you got sitting around waiting to be installed by you?

[jgt58]

I'll go first

Fr500 new steering wheel
Billisteins all way around
Cross drilled and slotted rear brakes
5k 55w hid head and fogs
Russell SS brake lines
New intake gaskets
New injector rebuild kits
Mmr imrc delete kit
Ford racing oil pump
And on the way speed hut oil pressure and water temp gauges
Fel pro valve cover bolt gaskets

Yea being a retail manager and having a family. Not much time sometimes.... now what you got in the garage?

1996 mustang cobra... many mods...

 

[96GT226410]

I have some stuff in my garage and I'm still picking up more things for the rebuild. Here's what I have so far...

11" Spec Stage 2 clutch
Aluminum flywhwel
FRPP shorty headers
Bassani O/R X pipe
MIL eliminators
Steeda TriAx shifter with gasket and new black Cobra knob from AM
MMR 7 qt. oil pan
Front and rear drilled and slotted rotors
Flat black rear bumper letter inserts
Trunk shocks
Lisence plate light covers and LED bulbs


Eventually:

Shortblock or rotating assembly
Cat back exhaust
Headlights
Shocks, struts, springs, X2 balljoints, bumpsteer kit, CC plates, and tires
FR500 steering wheel
4.10's
Radiator
FLSFC's

 

[milktasd2]

My friends will be helping me a lot, but:

Foxbody tail pipes 2.5"
ARH headers 1 7/8" with 3" x pipe
Corsa sport mufflers
Id1000 injectors
Thump tensioner with 76mm
Treadstone intercooler 1245
Vortech JT trim with 3" pulley
Vortech bracket
Vortech mounting kit
Vortech oil drain kit
Vortech oil feed kit
Vortech coolant pipes
Speedhut Boost gauge
Speedhut Air fuel gauge
Speedhut Fuel pressure gauge
A pillar Gauge pod
Anderson power pipe
Cxracing 3" intercooler piping
Ford 8 rib pulley setup
Tial Q 50mm bov
Ba5000
6pin maf pigtail
Aem wideband
T56 with 26 spline input shaft
McLeod rst clutch
Sfi 6.1 bell housing
Mgw orange shifter comfort/racing
Ford racing speed cal
03/04 pinion flange
03/04 cobra driveshaft
01 cobra intake nasvt ported
B intake to c intake adapter
Donathen bumper support
T56 mount

I'm waiting for my motor to get back from being built and waiting on my trueforged chicanes

 

[03cobra#694]

I'll go first

Fr500 new steering wheel
Billisteins all way around
Cross drilled and slotted rear breaks
5k 55w hid head and fogs
Russell SS break lines
New intake gaskets
New injector rebuild kits
Mmr imrc delete kit
Ford racing oil pump
And on the way speed hut oil pressure and water temp gauges
Fel pro valve cover bolt gaskets

Yea being a retail manager and having a family. Not much time sometimes.... now what you got in the garage?

1996 mustang cobra... many mods...

Damn Brakes

 

[cobralvr01]

I tore the IRS out of my '97 to have it rebuilt and throw 4.56's in it. AM back ordered the 4.56's so now I'm just waiting on that to get here.

 

[busta]

Pretty much installed everything that I accumulated over the winter. The only thing I have laying around that I haven't installed yet are MM Aluminum Rack Bushings.

 

[arayray]

Stifflers crossmember to finish my T56 install
Freshly paint parts:
Double din conversion
Matching shifter bezel
Gauge cluster surround
Wiper Cowl

 

[96redcobra]

Hoping to get these on this summer
MM Full length sub frame connectors
Torque box plates
Aluminum diff cover girdle
4.10 gears

 

[TK1299]

Whipple 2.3, GT super car fuel pumps in a Fore fuel hat waiting to go on my Terminator. I wonder if I'll ever get around to putting it in.

 

[jgt58]

Well made progress today

yes I know that I need to vacuum

1996 mustang cobra... many mods...

 

[96GT226410]

Well made progress today

yes I know that I need to vacuum

1996 mustang cobra... many mods...

Looks great. How was the install?

 

[P49Y-CY]

Wow some of you guys have alot of good stuff waiting to go on!

I have a abs-delete manifold I have been wanting to install. The light is on all the time now.

 

[jgt58]

Looks great. How was the install?

Install was super easy. Took 20 min with a puller

1996 mustang cobra... many mods...

 

[Bishop03]

Nitrous System Zex and bottle heater, bottle opener, window switch, nitrous shut off switch, purge and wideband. But I am having second thoughts on the Nitrous path.. See The Road to a Reliable good handling under 13 second car

 

[04DeadShort]

all new trim, molding, door hinges and weather-stripping (preparing for paint job)
S281 Wing and HO Fibertrends Cobra R hood
DEPO chrome projector style headlights
Window motors
MRT hood struts
MM full length sub frames
Slotted rotors and stainless lines
FRPP cobra style pedals

I've been accumulating for a few years lol.

 

[jgt58]

Got this little puppy installed

1996 mustang cobra... many mods...

 

[96GT226410]

Got this little puppy installed

1996 mustang cobra... many mods...

Where did you get those from?

*Edit - I see your other thread. Nice ebay find.

 

[Taco_Crisma]

More like what issues am I waiting to fix.

I've got a remote security box that I need to bring to a dealership for reprogramming but I don't feel like paying $100 to do it, so it's entering from the passenger door for me.

Unrelated to mustang I've got WRX STI struts that are sitting around waiting to be swapped into my 13' forester.

 

[jgt58]

Where did you get those from?

*Edit - I see your other thread. Nice ebay find.

They were 5 bux. Do you like them?