I bought billetflow's 2.76 S/C Pulley with the 4 piece idler set with the new style bracket and plan on installing this weekend... I noticed that billetflow's website reccommends gatorback belt size 75.1" part #4080745 and then Cobrabob's website reccommends gatorback belt size 74.5" part #4080745 for the same application. Just wondering what size you guys found to be correct?
What size belt should I be running with my new Billetflow pulley's?
- Thread starter ORANGE04SVT
- Start date
I would try the stock belt.........that should work just fine.
With 4 Pulley snub Idler Kit (3-100mm and 1-92mm)
Pulley Size....Belt Size........Gates Part No......Gatorback Part No.
3.65..............77"...................K080772...............4080772 (can not use New Bracket)
3.40..............76.5"................K080765...............4080765 (can not use New Bracket)
3.10..............75.5"................K080755...............4080755 (must use 92mm Idler Pulley)
2.93..............75.5"................K080755...............4080755 (with 100mm Idler)
2.76..............75.1".................K080751...............4080750 (with 100mm Idler) (Stock Belt)
Pulley Size....Belt Size........Gates Part No......Gatorback Part No.
3.65..............77"...................K080772...............4080772 (can not use New Bracket)
3.40..............76.5"................K080765...............4080765 (can not use New Bracket)
3.10..............75.5"................K080755...............4080755 (must use 92mm Idler Pulley)
2.93..............75.5"................K080755...............4080755 (with 100mm Idler)
2.76..............75.1".................K080751...............4080750 (with 100mm Idler) (Stock Belt)
Users who are viewing this thread
