for a 600-700hp Terminator? I hear good things about Centerforce DFX.
Nov 20, 2006 #1 W WynkoopBK Jiu Jitsu Established Member Joined Jun 14, 2006 Messages 35 Location Orange County, CA for a 600-700hp Terminator? I hear good things about Centerforce DFX.
Nov 20, 2006 #2 Screamin Cobra Slam'd Cam'd Z06 Established Member Joined Oct 31, 2005 Messages 8,137 Location Baton Rouge, LA Vehicle: SRT10 Viper Im gonna have to say Centerforce DFX, Im about to buy the setup from LFP.:beer:
Nov 20, 2006 #3 IronTerp Mid-Atlantic Cobra Assoc. Moderator Joined Nov 5, 2003 Messages 17,654 Location State College, Pa There is a TON of information on this subject in the Terminator Driveline Forum: http://www.svtperformance.com/forums/forumdisplay.php?f=216 Just scrolling page by page has helped me make my decision of Spec 3+ w/ a steel flywheel.......
There is a TON of information on this subject in the Terminator Driveline Forum: http://www.svtperformance.com/forums/forumdisplay.php?f=216 Just scrolling page by page has helped me make my decision of Spec 3+ w/ a steel flywheel.......
Nov 21, 2006 #4 CobraChris08 Why you pushing me? Established Member Joined Oct 17, 2005 Messages 3,891 Location Chicago I am at 450RWHP and I have the Centerforce DFX. It's very strong at my power level and I think it would work well up into the range that you would want. There is a bit of chatter when ever I start off.
I am at 450RWHP and I have the Centerforce DFX. It's very strong at my power level and I think it would work well up into the range that you would want. There is a bit of chatter when ever I start off.