whipple 2.9 chrusher throttle position sensor reading 18% @ idle

[aarons04cobra]

Anyone had this issue before? I have a previous thread referenced below but it is never stated what the final TPS reading was. Any help is appreciated.

Reference thread:

https://www.svtperformance.com/foru...ensor-reads-19-at-idle-whats-going-on.349900/

 

[aarons04cobra]

Malcolmv8 very kindly answered my question

"No worries on the TPS, sounds normal. TPS counts are usually around 195 ~ 200 when not touching the throttle. Or around 0.97 volts depending on the tool you're using.

So turns out this is completely normal